andreivik

2.4.10 beta + Functionality v2.3.57 + Firmware database update * improvement of the firmware update procedure in the first-generation CAN ECU: correct management of the programming session even if the ECU does not allow FORScan to check the current session status (for example, FF2.5 TCM 5M5P-12B565-DB)- critical error: FORScan "freezes" when working with J2534 Passthru devices on some operations- error: incorrect processing omit blocks in some PHF files (which led to the inability to flash some PCM correctly) - error: incorrect operation with recording blocks in some PHF files (which led to incorrect firmware of the Explorer 2008-2009 dashboard and possibly other models. There are still enough users who try to use non-recommended adapters. Currently, the adapters recommended for version 2.4 are OBDLink EX, ELS27 (with firmware 5.6.5 or later), and vLinker FS. Of the J2534 Passthru, the recommended ones are VCMII original, Scanmatik SM-2. The rest __________________________________________________________________________________________________________________________________________________________- 2.4.10 beta + Функционал v2.3.57 + Обновление базы прошивок * улучшение процедуры обновления прошивок в CAN ECU первого поколения: корректное управление сессией программирования даже если ECU не позволяет FORScan проверить текущий статус сессии (например, FF2.5 TCM 5M5P-12B565-DB)- критическая ошибка: "зависание" FORScan при работе с устройствами J2534 Passthru на некоторых операциях- ошибка: некорректная обработка блоков типа "omit" в некоторых файлах PHF (приводившая к невозможности правильно прошить некоторые PCM)- ошибка: некорректная работа с блоками записи в некоторых файлах PHF (приводившая к неправильной прошивке приборной панели Explorer 2008-2009 и возможно других моделей . По-прежнему достаточно пользователей, которые пытаются использовать не рекомендованные адаптеры. На данный момент рекомендованными для версии 2.4 адаптерами являются OBDLink EX, ELS27 (с прошивкой 5.6.5 или новее), vLinker FS. Из J2534 Passthru рекомендуемыми являются VCMII оригинал, Scanmatik SM-2. Остальные J2534 адаптеры либо ограничены по поддерживаемому функционалу и протоколам (Tactrix OpenPort 2.0, Chipsoft, UCDS), либо работают неправильно (клоны VCMII, VCXDiag в режиме VCMII и т.д.) ___________________________________________________________________________________________________________________________________________________ Download: FORScan v2.4.10 beta - with firmware update function FORScan v2.4.10 beta.rar

FORScan Lite для iOS / FORScan Windows / FORScan Lite Android There are many OBD2 scanners, but does FORScan somehow differ? Yes, because it is designed especially for Ford, Mazda, Lincoln and Mercury vehicles. So supports specific features of the manufacturer protocols, making the FORScan more powerful in work with these models than any regular OBD2 scanner. For example, FORScan can detect modules which are not visible for regular OBD2 scanners, it can show you and reset trouble codes which are never displayed by OBD2 scanners. FORScan can show you PIDs which are not supported by any OBD2 scanner, and also run specific tests and service procedures. Version of FORScan for Windows can also perform configuration and programming functions. In other words, FORScan can do things that regular OBD2 scanners can not do. Main features Detect vehicle on-board network configuration Read and reset Diagnostic Trouble Codes from all modules (see list of supported modules) Reading of modules' sensors' data Run test diagnostic procedures Run service procedures Configuration and programming functions (only in FORScan for Windows, require Extended License) Supported vehicles: Ford, Lincoln, Mercury models of 1996 - 2023MY (some models of 1994-1995MY are also supported). Attention: Some 2023MY Ford models may not be indentified (we work on it). FORScan may support limited set of functions and configuration parameters for brand new 2021-2023MY models (we work on it). 2024MY Ford and Lincoln models are not supported! Mazda models of 1996 - 2022MY up to 6G (inclusively). Attention: Mazda 7G models (new Mazda 3, CX-30, MX-30, CX-50 etc) are supported partially or not supported at all! Vehicles other than Ford, Mazda, Lincoln, Mercury are not supported! Please check for availability of necessary function before purchasing anything. Supported adapters : OBDLink EX USB, recommended USB adapter for Windows version of FORScan, also for configuration and programming functions OBDLink MX+ BT, recommended Bluetooth adapter for Lite versions of FORScan (iOS, Android) vLinker FS USB, recommended USB adapter for Windows version of FORScan, also for configuration and programming functions vLinker FD BT, recommended Bluetooth adapter for FORScan Lite for Android OBDLink SX/LX/MX ELS27 (STN1170/2120) ELM327-compatible (fully compatible with original ELM327, please also see important note below) J2534 Pass-Thru Important note: after many years of continued project development, even those of few ELM327 that have relatively good quality, ceased to meet all of the FORScan requirements. Besides, majority of the adapters that are being sold under ELM327 trademark have quite dubious quality that dropped a lot in the past: in fact, they have nothing common with the famous "ELM327" brand but name. Thus we do not recommend any "ELM327" anymore. If possible, please use adapters recommended above (OBDLink, vLinker). FORScan will continue to support ELM327 adapters, but some new functionality may be limited or refuse to work on outdated adapters. Supported protocols and bus: FORD HS CAN FORD MS CAN (only for J2534-2, CANtieCAR, OBDLink EX/MX/MX+, ELS27 or modified ELM327) FORD SCP FORD 9141 FORD UBP (only for Ford VCMII) Supported modules: Almost all of modules availabe through supported protocols. Full list is here. Supported platforms: Windows 2000/XP/Vista/7/8/8.1/10 (ELM327-compatible adapters with COM, USB, Bluetooth and WiFi interfaces, J2534 PassThru adapters). Note: only x86/x64 architecture is supported for Windows. ARM architecture is not supported! iOS v9.0 and higher (OBDLink MX+, ELM327 BLE and WiFi adapters) Android v4.0 and higher (ELM327 Bluetooth and WiFi adapters) Platforms in development: Windows Phone 8 (Bluetooth and WiFi adapters) - development stopped. DOWNLOAD FORScan Windows - [Hidden Content] FORScan Lite Android [Hidden Content] FORScan Lite для iOS [Hidden Content] Buy 1 year Extended License - [Hidden Content] Supported modules.txt

WinOLS 4.7 Version:4.7 Language:English,French,Deutsch,Italian,Polish,Russian OS requirement WIN8 and WIN10 You don't need to install VMware ---------------------------------- WinOLS 4.7 Версия:4.7 Язык интерфейса:Английский, Французский, Немецкий, Итальянский, Польский, Русский Требования к операционной системе WIN8 и WIN10 Вам не нужно устанавливать VMware СКАЧАТЬ  /  DOWNLOAD [Hidden Content]