.thumb.jpg.3fd3239c5d782486ba5613400c7acd0f.jpg)
.thumb.jpg.89a455ba1fe01f5d589c8319fe63320b.jpg)
TRUCK AND BUS SOFTWARE
91 files
-
Nexiq E-Technician 2.8.8560.16198 Full
By lotfree
Nexiq E-Technician 2.8.8560.16198 Full
HOW TO DOWNLOAD👇
4 downloads
(0 reviews)0 comments
Submitted
-
INTERNATIONAL DLB 04.2024 + PATCH
By lotfree
INTERNATIONAL DLB 04.2024 + PATCH FULL
All options are open, all parameters are editable.
Navistar® Engine Diagnostics is a diagnostic and programming service tool for Navistar® Engines. Navistar Engine Diagnostics, a full-featured PC application, is designed to meet the wide range of service diagnostic challenges of a mixed truck fleet. Coverage includes all J1939 international electronic engine systems. It allows you to monitor the control system, recover diagnostic trouble codes (DTCs), change parameters, view and plot engine data, and perform specialized service compartment tests on all after-treatment systems and engines. The application also has regular updates, which guarantee the most up-to-date coverage.
HOW TO DOWNLOAD 👇
4 downloads
(0 reviews)0 comments
Submitted
-
DTC Solutions Off Highway Edition 1.9.0 + Update
By lotfree
DTC Solutions Off Highway Edition 1.9.0 + Update
HOW TO DOWNLOAD 👇
7 downloads
(0 reviews)0 comments
Submitted
-
Cummins Insite 8.9.0.130 + Fix
By lotfree
Cummins Insite 8.9.0.130 + Fix FULL NEW VERSION
HOW TO DOWNLOAD 👇
5 downloads
(0 reviews)0 comments
Submitted
-
AGCO EDT 02.2024 + FIX FULL
By lotfree
AGCO EDT 02.2024 + FIX FULL
DESCRIPTION
Electronic Diagnostic Tool (EDT) can be used by dealership technicians to interface with specific machines that have a Controller Area Network (CAN) BUS as part of the electronic system architecture.
What is AGCO EDT?
AGCO Electronic Diagnostic Tool EDT is a set of programs that allows (using the appropriate adapter, which is purchased separately) to diagnose via the CAN data bus of AGCO Inc. products, which also provides an interpretation of error codes,which includes (not for all products) electrical circuits, description of sensors and locations their installation as well as solving the most common problems in the electrical field.
It is also important to emphasize that for the FENDIAS brand the FENDT FENDIAS program is necessary, for them a DONGLE is also needed. This is relevant as FENDIAS in AGCO EDT is just a redirector to FENDT FENDIAS.
HOW TO DOWNLOAD 👇
1 download
(0 reviews)0 comments
Updated
-
Bobcat Service Analyzer 92.10 + ACTIVATOR
By lotfree
Bobcat Service Analyzer 92.10 + ACTIVATOR
Bobcat Service Analyzer is a professional diagnostic software developed for fault detection, calibration, and software updates on Bobcat machines. It allows operators and technicians to quickly analyze electronic control units, view fault codes, and adjust system settings. The latest version 92.16 offers broader model support and improved performance.
HOW TO DOWNLOAD 👇
5 downloads
(0 reviews)0 comments
Submitted
-
ALLISON TCM REFLASH 6.3 FULL
By lotfree
ALLISON TCM REFLASH 6.3 FULL
Provides worldwide customers accurate, reliable, and trackable calibrations for use with allison transmissions using wtec ii, cec2, wtec iii, 1000 and 2000 product families tcms (pre-allison 4th generation controls), allison 4th generation controls tcms, and ep 40/50 systemstm (allison electric drivestm).
HOW TO DOWNLOAD 👇
1 download
(0 reviews)0 comments
Submitted
-
AGCO SERVICE ANALYZER 90.14 ENGINEER FULL
By lotfree
AGCO SERVICE ANALYZER 90.14 ENGINEER FULL
HOW TO DOWNLOAD 👇
1 download
(0 reviews)0 comments
Submitted
-
AGCO SERVICE ANALYZER 90.14 DEVELOPER FULL
By lotfree
AGCO SERVICE ANALYZER 90.14 DEVELOPER FULL
HOW TO DOWNLOAD 👇
2 downloads
(0 reviews)0 comments
Submitted
-
Xentry Activation Working Daimler Truck 09.2025 TOOL
By lotfree
Xentry Activation Working Daimler Truck 09.2025 TOOL
HOW TO DOWNLOAD 👇
10 downloads
(0 reviews)0 comments
Submitted
-
(0 reviews)0 comments
Submitted
-
.thumb.png.402c8fdc183028cda5dcc29671fbafdb.png)
DiagMaster 21.11.01 + Instruction FULL
By lotfree
DiagMaster 21.11.01 + Instruction FULL
Description
Update: 2023-2024
Region:All region
Type: Diagnostic Software
Language: English, German, French, Italian, Spanish, Japanese.
OS: Win Xp, Win 7, Win 8, Win 10, Win 11
Instructions: Present
Installation: Full
Version: 21.11.01
Diagmaster – communicates with multiple vehicle ECU’s by conventional serial communication as well as the modern CAN bus protocol. With new features like Automatic Vehicle Detection, Data Recording and Trouble Shooting Guidance, the Diagmaster platform offers all of the diagnostic information needed for advanced trouble shooting. The unique design makes it simple to expand and update to support new management systems and vehicles.
Diagmaster include a databse of Merlo, All, Dieci, Bobcat, Manitou, Nonself, Kubota, Carrier, Takeuchi and CNH, holds a Level 9
Database
HOW TO DOWNLOAD 👇
5 downloads
(0 reviews)0 comments
Submitted
-
DAF Paccar Davie 4 Firmware decrypt tool v2.2.0
By lotfree
DAF Paccar Davie 4 Firmware decrypt tool v2.2.0
750DAF Paccar Davie 4 Firmware decrypt tool v2.2.0, Unlimited version
decryption method with Master password covering ALL firmware's till 05.2025
HOW TO DOWNLOAD 👇
6 downloads
(0 reviews)0 comments
Submitted
-
Cummins Quickserve + ECFG Full
By lotfree
Cummins Quickserve + ECFG Full
QuickServe contains parts and service information for Cummins engines. Parts content and service documents available by engine serial number or engine family.
HOW TO DOWNLOAD 👇
10 downloads
(0 reviews)0 comments
Submitted
-
John Deere Service Advisor 07.2025 AG Full
By lotfree
John Deere Service Advisor 07.2025 AG Full
Repair manual John Deere Service Advisor 5.4.44 Offline 2025.07 Agricultural + Construction & Forestry Equipment
Type of catalogue: repair manual, Diagnostic Software
Make: John Deere
Region: WorldWide
languages: English, French, Italian, Spanish, Portuguese
Disks: 1000Gb
OS: Windows 10 64 bit, Windows 11 64 bit
What is John Deere's Service Advisor?
It's a diagnostic software that enables comprehensive diagnostics for agricultural and construction equipment, as well as engines manufactured by John Deere. The Electronic Data Link (EDL) is a dealer diagnostic PC-to-vehicle interface compatible with Service ADVISOR software, allowing access to service manuals, technical assistance center (DTAC) data, diagnostics, readings, tests, calibrations, and controller programming. The Service Advisor offers detailed workshop and repair manuals, among other features.
HOW TO DOWNLOAD 👇
6 downloads
(0 reviews)0 comments
Submitted
-
(0 reviews)0 comments
Submitted
-
VOLVO PTT APCI+ 0.7 - 11.2025 FULL
By lotfree
VOLVO PTT APCI+ 0.7 - 11.2025 FULL
Volvo Premium Tech Tool PTT 2.8.360 +0.7 APCI 2025 Development Mode + DevTool Software Type: Diagnostic Software
Database: Development
License: unlimited
APCI: APCI is valid for 1 year - after that, an update is required (available for an additional fee)
Size: 50 Gb
Languages: Multi-languages
Region: All regions
Supported Hardware: Work with original Nexiq 1, Nexiq 2, Nexiq 3, Vocom 1, Vocom 2, Vocom Mini, Scmatick 2/3 adapters Operating system: Windows 10, Windows 11 (64-bit)
Volvo Premium Tech Tool PTT 2.8.360 + 0.7 APCI 2025 Development Mode + DevTool - a cutting-edge diagnostic software solution designed to elevate your maintenance and servicing capabilities for a wide range of Volvo vehicles and equipment. Crafted for Windows (64-bit) environments, this comprehensive tool supports Windows 10 and 11, reflecting its flexibility and adaptability to your technical setup.
HOW TO DOWNLOAD 👇
10 downloads
(0 reviews)0 comments
Submitted
-
(0 reviews)0 comments
Submitted
-
Mercedes Daimler Truck 2025
By lotfree
Mercedes Daimler Truck 2025 Final
HOW TO DOWNLOAD 👇
8 downloads
(0 reviews)0 comments
Submitted
-
JLG TCM Reprograming Tool
By lotfree
JLG TCM Reprograming Tool
JLG-focused reprogramming utilities used in telehandler service workflows to update or restore specific control modules through a serial COM port connection. One tool targets the RoadRunner telehandler control module family, and the second tool targets a TCM ST10-based module. These utilities are typically used when a module is replaced, needs a firmware refresh, or requires a controlled reprogramming step as part of troubleshooting.
The RoadRunner control referenced here matches JLG part naming for a telehandler control module labeled CONTROL, UGM ROADRUNNER, associated with item number 1001146681.
Summary Highlights
Dedicated RoadRunner telehandler programming utility with clear COM port selection Dedicated TCM ST10 module programming utility with COM port selection Simple progress display for controlled programming sessions Useful for module replacement workflows where configuration or programming is required after installation Designed for workshop laptops where stable serial communication is needed Programming coverage depends on machine model, installed module, and firmware generation Package contents
1001146681vP2_8.exe TCM P4_3.exe Compatibility notes Intended for telehandler electronics where a serial COM port interface is used for programming RoadRunner tool is associated with the UGM RoadRunner control module family used on JLG equipment TCM ST10 tool targets a specific TCM hardware family based on ST10 architecture Always verify the correct module and machine serial range before programming Availability varies by vehicle and firmware Basic usage
Prepare a stable power supply, battery support is recommended during any module programming Connect the approved programming interface to the machine and confirm which COM port it uses in Device Manager Run the correct utility for the module you are servicing, then select the matching COM port in the dropdown Start the programming action and do not interrupt the session until the progress completes Cycle key power only when the procedure finishes and the tool indicates completion Operating systems
Windows standalone executable utilities (.exe) Windows 7, Windows 8.1, Windows 10, Windows 11 (32-bit or 64-bit depending on the build, not specified in the package) Minimum system requirements
CPU: Dual-core 2.0 GHz or better RAM: 2 GB minimum, 4 GB recommended Storage: 100 MB free space Network: Not required for offline programming sessions Permissions: Admin rights may be required to access serial drivers and COM port settings Disclaimer
Source of Files. All software and resources in this post are collected from public and open sources on the internet. We do not claim authorship or ownership.
File Hosting. This forum does not host files. All links point to third party public cloud storage. We are not responsible for external content.
User Responsibility. Software is provided for educational and evaluation purposes only. You use it at your own risk. Authors of the post and forum administration are not liable for any damage.
HOW TO DOWNLOAD 👇
2 downloads
(0 reviews)0 comments
Submitted
-
CAT SIS 2035 CERTIFICATE Patch TOOL
By lotfree
CAT SIS 2035 CERTIFICATE Patch TOOL
HOW TO DOWNLOAD 👇
2 downloads
(0 reviews)0 comments
Submitted
-
Hitachi Construction Machinery MPDr 3.7.00 + Patch
By lotfree
Hitachi Construction Machinery MPDr 3.7.00 + Patch
Description: Hitachi Construction Machinery MaintenancePRO MPDr version 3.7.0.0 is intended for diagnostics of construction. Also, the program is diagnoses with the engine, hydraulic system and bodywork. In addition to diagnostics, the program is designed to read and erase errors, change the basic values of the engine speed, exhaust valve pressure, current parameters and much more. On our site only diagnostic software without an adapter is provided.
Type of software: Diagnostic Software
Capacity: 50.5MB
Version: 3.7.0.0
Brand: Hitachi
Region: All region
Language: English, Japanese, Spanish, Portuguese
Computer Requirements:
OS : Windows 7, 8, 10 32/ 64 bit
Hard Drive: Free 20 GB or more (recommend use SSD drive)
CPU: Intel Core I3 gen 2 and up
RAM: 4 GB or more
Software Feature:
You can set or check the next parameters:
The operation of the engine
The settings of the control of the machine
The settings of the monitor
Change or check the settings of the information controller and communication terminal
Change or check the settings of others function
Hitachi Construction Machinery MaintenancePRO MPDr has the following functions:
Monitoring System
This system allows dealers to monitor information about hydraulic pressure, Hydraulic Oil Temperature, Actual Engine speed, etc., that is sent from sensors or switches.
HOW TO DOWNLOAD 👇
5 downloads
(0 reviews)0 comments
Submitted
-
Scania SDP3 v2.67.1.2 + Activator
By lotfree
Scania SDP3 v2.67.1.2 + Activator
Brand: SCANIA
File Size: 1.12 GB
Category: MARINE
Size Installed: 4.01 GB
License time: UNLIMITED
Software Type: DIAGNOSTIC, REPROGRAMMING
Region: ALL REGIONS
Operating System: WINDOWS 11 (64 BITS), WINDOWS 10 (64 BITS)
OP Not Supported: WINDOWS 7 (32 BITS), WINDOWS 10 (32 BITS), WINDOWS 7 (64 BIT）
Database Language: ENGLISH
Interface Language: CZECH, SPANISH, FRENCH, ITALIAN, CHINESE, POLISH, PORTUGUESE
TURKISH, KOREAN, GERMAN, ENGLISH
Updates
EXHAUST GAS AFTERTREATMENT FOR ENGINES WITH THE EMS S8 OR EMS EME1 CONTROL SYSTE THE WIZARD ANALYSIS OF SAVED VEHICLE INFORMATION IN THE EVENT OF HIGH NITROGEN OXIDE EMISSIONS, UNDER EXHAUST GAS AFTERTREATMENT, IS NOW ACTIVATED FOR INDUSTRIAL AND MARINE ENGINES WITH THE EMS S8 OR EMS EME1 ENGINE MANAGEMENT SYSTEMS. FOR ENGINES FITTED WITH THE EME1 ENGINE MANAGEMENT SYSTEM, THE SUPPLIER'S SOFTWARE VERSION MUST BE 75.43.29 OR LATER. THIS IS A REQUIREMENT FOR THE ENGINE CONTROL UNIT TO BE ABLE TO DISPLAY SAVED SIGNALS FOR INSTALLATIONS WITHOUT AN EXTERNAL CLOCK SIGNAL. THE SUPPLIER'S SOFTWARE VERSION CAN BE FOUND UNDER THE DESCRIPTION TAB. TWO NEW WIZARDS FOR AMS2: TWO NEW WIZARDS HAVE BEEN INTRODUCED, TROUBLESHOOTING USING A MANOMETER AND PERFORMANCE TESTING OF THE FLUID PART OF THE SCR SYSTEM. THE WIZARDS APPLY TO VEHICLES FITTED WITH THE AMS2 CONTROL SYSTEM. THE WIZARDS, TOGETHER WITH A TROUBLESHOOTING TREE IN MULTI, SIMPLIFY TROUBLESHOOTING OF THE SCR SYSTEM. THE TROUBLESHOOTING DIAGRAM WILL BE INTRODUCED IN WSM 03-95 AND WILL BE PUBLISHED ON 2025-08-19. AIR PRESSURE CONTROL FOR WASTEGATE AND EXHAUST BRAKE ON VALVE BLOCK V107. THE FUNCTION THAT PREVIOUSLY CONTROLLED THE DEGREE OF OPENING OF THE PROPORTIONAL VALVE ON THE VALVE BLOCK FOR THE WASTEGATE AND EXHAUST BRAKE IS NOW REPLACED INSTEAD BY AN OUTPUT PRESSURE REQUEST. IT WILL CONTINUE TO BE POSSIBLE TO MONITOR THE DEGREE BY WHICH THE PROPORTIONAL VALVES OPEN. THE CHANGE COVERS THE EMS10 CONTROL UNIT AND CAN BE FOUND IN THE ELECTRICAL SYSTEM VIEW UNDER: EMS>E44>EMS10>SOLENOID VALVES > V107. THE ACTION IS TAKEN TO PROTECT THE WASTEGATE AND HOSES FROM PRESSURE LOADS HIGHER THAN THE MAXIMUM PERMITTED 4.5 BAR. IT WILL CONTINUE TO BE POSSIBLE TO LOAD THE EXHAUST BRAKE AT FULL SYSTEM PRESSURE,8 BAR. HOW TO DOWNLOAD 👇
7 downloads
(0 reviews)0 comments
Submitted
-
Bendix ACom 2023 + Activator
By lotfree
Bendix ACom 2023 + Activator
ACom PRO is built to automatically detect supported systems and collect diagnostic trouble codes from Bendix ECUs, and it can also gather key vehicle ECU information where supported such as engine and transmission data.
Summary Highlights
Read and clear DTCs, save vehicle history, and generate printable diagnostic reports
Guided troubleshooting workflow and “NextStep” style assistance for common fault paths (where available)
Live data monitoring for wheel speeds, pressures, voltages, inputs and outputs, and system status
Bi-directional and functional tests (component tests, routine checks, service functions where supported)
Supports Bendix electronic platforms used across ABS, stability, ADAS, TPMS, and related systems
HOW TO DOWNLOAD 👇
15 downloads
(0 reviews)0 comments
Submitted
-
YANMAR DIAGNOSTIC TOOL 2.37.0 FULL
By lotfree
YANMAR DIAGNOSTIC TOOL 2.37.0 FULL
Industrial Engine / Agriculture / Energy System / Construction (Yanmar Industrial Diesel)
TNE Series: 2TNE68, 3TNE68, 4TNE84, 4TNE88
TNV Series: 2TNV70, 3TNV70, 3TNV76, 3TNV82, 3TNV84T, 3TNV88, 4TNV84T, 4TNV88, 4TNV94L, 4TNV98, 4TNV98T, 4TNV106, 4TNV106T
TNV Common Rail (CR) Series: 3TNV88C, 3TNV86CT, 3TNV86CHT, 4TNV88C, 4TNV86CT, 4TNV86CHT, 4TNV98C, 4TNV98CT, 4TNV94FHT
Marine / Ocean (Yanmar Marine Engines)
2YM15
3YM20
3YM30AE
4JH45
4JH57
4JH80
4LV150, 4LV170, 4LV195, 4LV230, 4LV250
6LY440
HOW TO DOWNLOAD 👇
5 downloads
(0 reviews)0 comments
Submitted